Netzwerk

Eigenschaften Netzwerkinterface bearbeiten / auslesen

• Weiter Infos

# ethtool eth0              # Show the ethernet status (replaces mii-diag)
# ethtool -s eth0 speed 100 duplex full # Force 100Mbit Full duplex
# ethtool -s eth0 autoneg off # Disable auto negotiation
# ethtool -p eth1           # Blink the ethernet led - very useful when supported
# ip link show              # Display all interfaces on Linux (similar to ifconfig)
# ip link set eth0 up       # Bring device up (or down). Same as "ifconfig eth0 up"
# ip addr show              # Display all IP addresses on Linux (similar to ifconfig)
# ip neigh show             # Similar to arp -a

# dmesg | grep -i duplex
   eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

# mii-tool
   eth0: negotiated 100baseTx-FD flow-control, link ok